In the Advanced settings click on TCP/IP. Select the wireless network broadcasting from your access point to connect to it, either NETGEAR_11N or NETGEAR_11ACĤ. Click on the up/down arrow next to Network Name to see the list of available wireless networks. Connecting to either of these SSID's is required to access the web interface and configure the access point.ģ. The wireless networks are NETGEAR_11N on the 2.4GHz band and NETGEAR_11AC on the 5GHz band. When the access point is in factory default settings it will broadcast 2 wireless networks with open security. Your Ethernet adapter is now configured with static IP 192.168.0.210 and the access point web interface is accessible at Ĭonnecting wirelessly to the access point: In the network settings select Ethernet, set Configure IPv4: Manually.Įnter IP address 192.168.0.210 in the IP address field.Įnter 255.255.255.0 in the subnet mask field. Record the IP address and subnet mask of your computer so that you can reinstate these IP address settings later.ģ. Click the Apple icon, then System Preferences.
This article outlines the steps required to set a static IP address on your Ethernet adapter if using a direct connection between your Mac and the access point or wireless adapter if connecting wirelessly to the access point.Ĭonnecting directly to the access point via Ethernet cable:ġ. Wait for your Mac to automatically connect to the internet.Accessing your WAC104 for the first time requires connecting your Mac to your access point and setting a static IP address on your Ethernet or wireless adapter.Open the Interface dropdown menu and select Ethernet and then click Create and Apply. Click the add (+) button and a popup will appear.Now again go to System Preferences > Network.Then restart your Mac (Apple menu > Restart).
If you are not sure about how to configure these settings, contact your service provider. You will see, on the left, a list of network services. On your Mac, go to the Apple menu > System Preferences > Network. Wait for your ethernet device to turn on fully.Turn on your ethernet device by plugging the power cord back in.You can do so by unplugging the power cord. Turn off your ethernet device like your modem.Note: en0 is the name of wireless interface. Then enter the following command and hit enter:Īnd then test to see if Ethernet is now working.Enter the following command and press enter:.Open Terminal (Applications > Utilities).You can restart your Mac’s network interface using Terminal. You can also try plugging the ethernet cable into a different port. Use a different cable if possible.įurthermore, please ensure that you check for firm, proper connections between your computer and the ethernet device. Make sure that your Ethernet cable is working and not damaged.
And if there is an update, follow the onscreen instructions to update your Mac.
You can check for updates by going to System Preferences > Software Update. Make sure that your Mac has the latest version of macOS. If you are having this problem, try the steps below in order until you have fixed your issue. On your Mac, you can use a wired connection, instead of Wi-Fi, by connecting your Ethernet cable between your router or modem and the Ethernet port (or your Ethernet adapter if your Mac does not have this port). Likewise, you may experience that your Mac’s Ethernet ports may not be working and you may see that network status is saying “Cable Unplugged” while it is connected. Sometimes you may experience that your Wi-Fi connection is working properly, but still, you may not connect your Mac to the internet using Ethernet. This article explains how you can troubleshoot when your wired ethernet connection is not working on your Mac. Facebook Twitter Pinterest LinkedIn Print Email